Manual Janome Memory Craft 11000 Special Edition (page 9 of 112) (English)

602019

Zoom out

Zoom in

1/112

Setting the Spool of Thread

Lift up the spool pin. Place the spool of thread on the

spool pin with the thread coming off the spool as

shown. Attach the large spool holder, and press it firmly

against the spool of thread.

NOTE:

Use the small spool holder to hold narrow or small

spools of thread.

Extra spool pin

Use the extra spool pin when you need to wind a

bobbin without unthreading the machine while working

on a sewing project.

Insert the extra spool pin into the spool supporter and

then into the hole beside the horizontal spool pin.

Place the felt cushion on the spool pin and place a

spool of thread on it as shown.

NOTE:

The extra spool pin is also used for twin needle

sewing.

Winding the Bobbin

This machine has an exclusive motor for bobbin

winding, which allows you to wind the bobbin while

stitching.

1 Slide the hook cover release button to the right, and

remove the hook cover plate.

2 Lift out the bobbin from the bobbin holder.

3 Pull the thread from the spool and pass the thread

through the thread guide.

Draw the thread around and under the bobbin

winding tension disk.

4 Pass the thread through the hole in the bobbin from

the inside to the outside.

5 Put the bobbin on the bobbin winder spindle.

Push the bobbin winder stopper to the left.

6 Hold the free end of the thread in your hand and

press the bobbin winding button .

Press the bobbin winding button again to stop the

bobbin when it has wound several layers, and cut

the thread close to the hole in the bobbin .

Use the Janome plastic bobbins for horizontal hook

(marked with “J”). Using other bobbins, such as

prewound paper bobbins, may cause stitching problem

or damage to the bobbin case.

NOTE:

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Janome Memory Craft 11000 Special Edition in the language / languages: English as an attachment in your email.

The manual is 18,61 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Janome Memory Craft 11000 Special Edition Manual

Product: