472842

Janome Jem Gold Plus Manual

58
Zoom out
Zoom in
Previous page
1/61
Next page
52
Trouble Shooting
Condition
The needle thread
breaks.
The bobbin thread
breaks.
The needle breaks.
Skipped stitches
Seam puckering
The cloth is not
feeding smoothly.
Loops on the
seams
The machine
doesn’t work.
Noisy operation
The cloth is not cut
properly.
Cause
1. The needle thread is not threaded properly.
2. The needle thread tension is too tight.
3. The needle is bent or blunt.
4. The needle is incorrectly inserted.
5. The needle thread and the bobbin thread are not set
properly under the presser foot at the start of sewing.
6. The threads were not drawn to the rear after sewing.
7. The thread is too heavy or too fine for the needle.
1. The bobbin thread is not threaded properly in the
bobbin holder.
2. Lint has collected in the bobbin holder.
3. The bobbin is damaged and doesn’t turn smoothly.
1. The needle is incorrectly inserted.
2. The needle clamp screw is loose.
3. The threads were not drawn to the rear after sewing.
4. The needle is too fine for the fabric being used.
1. The needle is incorrectly inserted, bent or blunt.
2. The needle and/or threads are not suitable for the
work being sewn.
3. A Blue Tipped needle is not being used for sewing
stretch, very fine fabrics and synthetics.
4. The needle thread is not threaded properly.
5. The poor quality needle is used.
1. The needle thread tension is too tight.
2. The needle thread is not threaded properly.
3. The needle is too heavy for the fabric being sewn.
4. The stitch length is too long for the fabric.
*
When sewing the fine fabric, place the interfacing on
the wrong side of the fabric.
1. The feed dog is packed with lint.
2. The stitches are too fine.
3. The feed dog is not raised after “drop feed” sewing.
1. The needle thread tension is too loose.
2. The needle is too thick or too fine for the fabric.
1. The machine is not plugged in.
2. There is thread caught in the hook race.
3. The bobbin winder spindle is not returned to the left
after bobbin winding. (Bobbin winding condition)
1. There is thread caught in the hook race.
2. Lint has built up in the hook race or bobbin holder.
1. The pattern selected is not for the side cutter sewing.
2. The needle thread is not threaded properly.
3. The lower blade is not set proplerly.
Reference
Page 20-22
Page 26-28
Page 12
Page 12
Page 24
Page 32
Page 12
Page 18
Page 48
Change the bobbin
Page 12
Page 12
Page 32
Page 12
Page 12
Page 12
Page 12
Page 20-22
Change the needle
Page 26-28
Pages 20-22
Page 12
Make stitch shorter.
Page 48
Make stitch longer.
Page 30
Page 26-28
Page 12
Page 6
Page 48
Page 16
Page 48
Page 48
Page 36
Page 20-22
Page 34, 36
… 58 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome Jem Gold Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome Jem Gold Plus in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 2,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info