472842
42
Zoom out
Zoom in
Previous page
1/61
Next page
36
SECTION IV. UTILITY AND DECORATIVE
STITCHES
To set the built-in side cutter
z Attach the exclusive serging foot (U).
Pull 4˝ (10 cm) of both threads back and under the
presser foot.
e
w
r
t
z
x
c
v
q
x Turn the handwheel toward you to raise the thread
take-up lever q to its highest position. Lower the
presser foot w with the presser foot lifter.
q Thread take-up lever
w Presser foot lifter
c Swing down the lever e to set the built-in side cutter.
e Lever
v Slide up the lever, and insert the end of the lower
blade into the opening of needle plate.
r Lower blade
t Opening of needle plate
* Be sure the lower blade is inserted into the opening.
Side Cutter Sewing
weq
•Turn the power switch off when setting the built-in side
cutter.
While in operation, always keep your eyes on the
sewing area, and do not touch any moving parts such
as the thread take-up lever, cutter blade or needle.
Do not touch the cutter blades as they have sharp
edges.
Select only wide zigzag or overedge stitch pattern
when using a built-in side cutter.
Attach the exclusive serging foot (U) when using a
built-in side cutter.
•Sew at the slowest speed as possible.
Always store the built-in side cutter unit in its original
position when it is not in use.
CAUTIONS:
Machine setting
q Stitch selector: or
w Needle thread tension: 3 – 7
e Presser foot: Serging foot: U
The side cutter is specially designed for cutting and
overcasting the fabric edge at the same time.
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome Jem Gold Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome Jem Gold Plus in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 2,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info