472842
38
Zoom out
Zoom in
Previous page
1/61
Next page
32
SECTION III. BASIC SEWING
Starting to sew
Raise the presser foot and position the fabric next to a
seam guide line on the needle plate (5/8˝ (1.6 cm) is
most common). Lower the needle to the point where
you want to start. Lower the presser foot and pull the
threads toward the back. Depress the foot control.
Gently guide the fabric along a seam guide line letting
the fabric feed naturally.
Straight Stitch
Machine setting
q Stitch selector:
w Needle thread tension: 2 – 6
e Presser foot: Zigzag foot: A
Use the Seam Guides
q Center needle position
w Edge of fabric
e Needle plate guide lines
The seam guides on the needle plate are there to help
you measure seam width. The numbers on the needle
plate indicate the distance between the center needle
position and the edge of the fabric. The lines are 1/8˝
(0.3 cm) apart, and are engraved at 3/8˝, 4/8˝ and 5/8˝.
The lines in millimeters are 5 mm apart, and are en-
graved at 10 mm, 15 mm, 30 mm and 40 mm.
CAUTION: Do not place fingers near to the presser foot
when guiding fabric, or the needle clamp screw may
strike and injure your fingers.
Finishing sewing
To fasten the ends of a seam, press the reverse stitch
control and sew several reverse stitches. Raise the
presser foot. Remove the fabric, draw the threads to the
back and cut them with the thread cutter. The threads are
now the proper length to begin sewing the next seam.
weq
e
q
w
e
Thread Cutter
q Thread cutter
You do not need a pair of scissors to cut the thread
after sewing. Simply use the built-in thread cutter.
q
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome Jem Gold Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome Jem Gold Plus in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 2,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info