472819
61
Zoom out
Zoom in
Previous page
1/96
Next page
59
Button Sewing
Machine settings
Pattern: 34 (Buttonhole)
Thread tension: AUTO
Presser foot: Button sewing foot T
Foot pressure: 7
Feed dog: Lowered (refer to page 22.)
WARNING:
Turn the power switch off before changing the presser
foot.
Attaching the button sewing foot T
Insert the rear pin on the foot into the rear groove of the
foot holder.
1Rear pin
2 Rear groove
Gently lower the presser bar while holding the foot with
your fingers.
Sewing
Lower the feed dog.
Place a button on the fabric and lower the needle into the
left hole of the button by turning the handwheel with your
hand.
Lower the foot to hold the button in place, aligning the
direction of the button.
Raise the needle by turning the handwheel until the
needle bar swings to the right.
Press the stitch width adjusting key so the needle enters
into the right hole of the button.
Start sewing and continue until the machine stops
automatically.
Remove the fabric from the machine.
Pull the bobbin threads to bring the needle threads down
to the wrong side of the fabric.
Tie the threads together.
1
2
61


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome Horizon 7700QCP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome Horizon 7700QCP in the language / languages: English as an attachment in your email.

The manual is 5,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info