472819
49
Zoom out
Zoom in
Previous page
1/96
Next page
47
Blind Hemming
Machine settings
Pattern: 16 or 17 (Utility)
Thread tension: AUTO
Presser foot: Blind hemming foot G
Foot pressure: 7
Select pattern 16 for woven fabrics or pattern 17 for
elastic fabrics.
Folding the fabric
Fold the fabric to make a hem as shown.
1 Heavy fabric
2 Fine to medium fabric
3 0.4 -0.7 cm (3/16”-1/4”)
4 Overcasting
5 Wrong side of fabric
Sewing
Position the fabric so that the fold comes to the left side
of the guide on the foot.
Lower the presser foot.
Adjust the position of the needle swing with the stitch
width adjusting button so that the needle just pierces the
folded edge of the fabric when the needle comes over to
the left side.
Sew guiding the fold along the guide.
6 Guide on the foot
7 Fold
Open the fabric with the right side up.
The stitches on the right side of the fabric will be almost
invisible.
8 Right side of fabric
1
2
3
4
5
5
3
7
6
8
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome Horizon 7700QCP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome Horizon 7700QCP in the language / languages: English as an attachment in your email.

The manual is 5,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info