472819
46
Zoom out
Zoom in
Previous page
1/96
Next page
44
Sewing
z Fold back the left seam allowance. Turn the right
seam allowance under to form a 0.2 to 0.3 cm (1/8“)
margin. Place the zipper teeth next to the fold and
pin in place.
Set the stitch length and thread tension back to the
original setting.
1 0.2 to 0.3 cm (1/8”) margin
2 Zipper teeth
3 Fold
4 End of the zipper opening
x Attach zipper foot E with the pin on the right hand
side.
Lower the foot onto the topside at the end of the
zipper opening so that the needle pierces the fabric
next to the fold and the zipper tape.
Sew along the zipper guiding the zipper teeth along
the side edge of the foot.
c Sew through all layers next to the fold.
Stop 5 cm (2”) before zipper foot E reaches the slider
on the zipper tape.
Lower the needle slightly into the fabric.
Raise the foot and open the zipper to clear the slider.
Lower the foot and stitch the remainder of the seam.
5 Slider
65 cm (2”)
2
1
3
4
5
4
6
z
c
x
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome Horizon 7700QCP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome Horizon 7700QCP in the language / languages: English as an attachment in your email.

The manual is 5,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info