472819
43
Zoom out
Zoom in
Previous page
1/96
Next page
41
Overcasting Stitches
Overcasting with zigzag stitch
Machine settings
Pattern: 9 or 10 (Utility)
Thread tension: AUTO
Presser foot: Overcasting foot C
Foot pressure: 7
Place the fabric edge next to the guide of the foot and
then sew.
1 Edge of fabric
2 Guide
CAUTION:
When you use the overcasting foot C, you must set the
zigzag width at 4.5 or wider to prevent the needle from
hitting the wires on the foot.
Multiple zigzag stitch (Tricot stitch)
Machine settings
Pattern: 11 (Utility)
Thread tension: AUTO
Presser foot: Zigzag foot A
Foot pressure: 7
This stitch is used to finish a raw edge of synthetics and
other stretch fabrics that tend to pucker.
Sew along the fabric edge leaving an adequate seam
allowance.
After sewing, trim the seam allowance close to the
stitches.
Overcasting stitch
Machine settings
Pattern: 12 (Utility)
Thread tension: AUTO
Presser foot: Overcasting foot C
Foot pressure: 7
This stitch can be used to simultaneously seam and
overcast edges of fabrics.
Use this stitch when you do not need to open seams flat.
Place the fabric edge next to the guide of the foot and
then sew.
1 Edge of fabrics
2 Guide
NOTE:
The stitch width cannot be changed to less than 4.5.
2
1
2
1
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome Horizon 7700QCP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome Horizon 7700QCP in the language / languages: English as an attachment in your email.

The manual is 5,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info