472819
16
Zoom out
Zoom in
Previous page
1/96
Next page
14
Setting the Spool of Thread
Lift up the spool pin. Place the spool of thread on the
spool pin with the thread coming off the spool as shown.
Attach the large spool holder, and press it firmly against
the spool of thread.
1 Large spool holder
NOTE:
Use the small spool holder to hold narrow or small spools
of thread.
2 Small spool holder
Extra spool pin
Use the extra spool pin when you need to wind a bobbin
without unthreading the machine while working on a
sewing project.
Insert the extra spool pin into the spool supporter and
then into the hole beside the horizontal spool pin.
Place the felt cushion on the spool pin and place a spool
of thread on it as shown.
3 Extra spool pin
4 Spool supporter
5 Hole for extra spool pin
6 Felt cushion
NOTE:
The extra spool pin is also used for twin needle sewing.
Removing the Bobbin
Slide the hook cover release button to the right, and
remove the hook cover plate.
1 Hook cover release button
2 Hook cover plate
Lift out the bobbin from the bobbin holder.
3 Bobbin
NOTE:
Use the Janome plastic bobbins for horizontal hook
(marked with J”). Using other bobbins, such as
pre-wound paper bobbins, may cause stitching problems
and/ or damage to the bobbin holder.
1
2
6
3
4
5
3
1
2
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome Horizon 7700QCP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome Horizon 7700QCP in the language / languages: English as an attachment in your email.

The manual is 5,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info