472819
10
Zoom out
Zoom in
Previous page
1/96
Next page
8
4 Needle up/down position button
Press this button to bring the needle bar up or down.
The machine will stop with the needle up or down
depending on the position set by this button.
The LED signal is turned on when the down position is
selected.
NOTE:
The machine will always stop with the needle up after
sewing buttonholes, darning and monograms.
If you press the up/down needle position button when the
presser foot is at the extra lifted position, the LCD screen
will advise you to lower the foot.
5 Thread cutter button
Press this button after finishing sewing and the machine
will trim the threads automatically.
The LED signal blinks while cutting threads.
NOTES:
Use the thread cutter on the face plate when cutting
specialized threads or threads #30 or thicker.
Clean the auto thread cutter mechanism regularly to
avoid malfunction due to built up lint.
Avoid using a paper-cored spools with the auto thread
cutter. When nearly empty, they may not unwind
smoothly and cause the thread to bunch up or slip when
using the auto thread cutter (refer to page 10).
Do not pull the fabric if auto thread cutting fails and the
thread tangles. Turn the power switch off and remove
the needle plate to remove the tangled threads (refer to
page 89).
6 Jog dial
The jog dial is used for selecting stitch patterns,
characters and certain settings.
Turn the jog dial clockwise or counterclockwise with your
fingertip to browse patterns or settings.
7 Confirm button
Press the confirm button to select the desired pattern or
settings.
4
5
6
7
LED signal
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome Horizon 7700QCP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome Horizon 7700QCP in the language / languages: English as an attachment in your email.

The manual is 5,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info