472835
29
Zoom out
Zoom in
Previous page
1/36
Next page
27
Serging
Machine setting
q Stitch selector: G
w Stitch length: S.S.
e Needle thread tension: 3 – 7
r Presser foot: Zigzag foot A
This stitch is ideal for 1/4˝ (0.6 cm) seams on knits or on
medium to heavy weight woven fabrics where you want a
narrow seam. It is also great for sewing spandex swim
wear. Place the fabric under the presser foot [A] so that the
stitches are made over the raw edge.
Overcast Stretch Stitching
Machine setting
q Stitch selector: E or F
w Stitch length: S.S.
e Needle thread tension: 2 – 6
r Presser foot: Zigzag foot: A
This stitch is for sewing a seam with an overcast finish. It is
used when making swim wear, ski pants and other
garments which require stretch.
To sew
Place raw edges of fabric to the “left” of the needle as
shown. Sew in a manner so that the needle pierces the
fabric very close to the outside edge. Or place the fabric
to allow a 5/8˝ (1.6 cm) seam, then trim the seam
allowance. Raw or worn edges of older garments can
be overcast to prevent further raveling.
we
r
q
we
r
q
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome HF5812 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome HF5812 in the language / languages: English as an attachment in your email.

The manual is 1,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info