472835

Janome HF5812 Manual

23
Zoom out
Zoom in
Previous page
1/36
Next page
21
• To sew
z Set the pattern selector dial at “ ”.
Carefully mark buttonhole length on fabric.
Place the fabric under the foot with the buttonhole
marking running toward you.
Draw both the needle and bobbin thread to the left.
Move the slider toward you so that the top mark w on
the lider meets the start mark q.
q Start mark
w Top mark
e Needle thread
r Bobbin thread
c Raise the needle to its highest position.
Set the pattern selector dial at “ ”. Sew 5 stitches,
then stop sewing at a right stitch.
v Raise the needle to its highest position.
Set the pattern selector dial at “ ”. Sew until the
needle reaches the back marking of the buttonhole.
b Raise the needle to its highest position.
Set the pattern selector dial at “ ”. Sew 5 stitches,
then stop sewing. Set the stitch length dial to “0” and the
pattern selector dial at straight sewing.
Sew a few locking stitches.
n Raise the needle and presser foot. Remove the fabric
from the machine and cut the sewing thread. Insert a pin
inside the bartack.
Then cut the opening with a seam ripper.
Take care not to cut the stitches.
t Pin
y Seam ripper
4-Step Buttonhole
Machine setting
q Stitch selector:
w Stitch length:
e Needle thread tension: 1 – 5
r Presser foot: Sliding buttonhole foot
• To adjust buttonhole stitch density
Set the stitch length dial between “ ” to adjust the
buttonhole stitch density.
u Denser buttonhole
i Coarser buttonhole
x Sew forward until you reach the front marking of your
buttonhole. Stop sewing at a left stitch.
NOTE:
The scale on the slider is engraved in centimeters.
* For easier buttonhole foot attachment, move the slider all
the way to the front of the foot. For easier removal, move
the slider all the way to the back of the foot.
NOTE:
Place a piece of paper under the fabric when you make
a buttonhole on the edge of a thick fabric.
This prevents the fabric edge from being trapped into
the feed dog window.
q Piece of paper
z
w
q
e
r
t
y
ui
n
we
r
q
xc v b
q
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome HF5812 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome HF5812 in the language / languages: English as an attachment in your email.

The manual is 1,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info