472835

Janome HF5812 Manual

8
Zoom out
Zoom in
Previous page
1/36
Next page
6
Changing the Needle
q Needle clamp screw
w Needle clamp
e Flat side
r Gap
z Turn off the power switch.
Raise the needle to its highest position by turning the
handwheel counterclockwise, toward you, and lowering
the presser foot. Loosen the needle clamp screw q by
turning it counterclockwise. Remove the needle from the
needle clamp w.
x Insert a new needle into the needle clamp w with the
flat side to the rear. When inserting the needle into the
needle clamp w, push it up as far as it goes. Tighten
the needle clamp screw q firmly by turning it clockwise.
c To see if the needle is good, place the flat side e of the
needle onto something flat (needle plate, glass, etc.).
The gap r between the needle and the flat surface
should be consistent. Never use a bent or blunt needle.
A damaged needle can cause permanent snags or runs
in knits, fine silks and silk-like fabrics.
Changing the Presser Foot
CAUTION:
When attaching or removing presser foot, turn OFF the
power switch and remove the needle from the needle
clamp.
• To attach
Insert the presser foot pin q into the slit w of the presser
holder and push the presser foot to lock it in place.
• To remove
Pull the foot in the direction of arrow to remove the presser
foot.
To Remove and Attach the Foot Holder
CAUTION:
When attaching or removing foot holder, turn OFF the
power switch and remove the needle from the needle
clamp.
• To remove
Remove the setscrew by turning it counterclockwise with a
screwdriver and remove the foot holder.
• To attach
Match the hole in the foot holder with the threaded hole in
the presser bar. Fit the setscrew into the hole. Tighten the
screw by turning it clockwise with a screwdriver.
q Setscrew
w Foot holder
e Hole
r Threaded hole
q
w
e
r
q
q
w
e
r
w
q
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome HF5812 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome HF5812 in the language / languages: English as an attachment in your email.

The manual is 1,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info