Manual Janome Decor Computer 2010 (page 62 of 86) (English)

472826

Zoom out

Zoom in

1/86

v Raise and re-attach the zipper foot on the left-hand

side of the pin.

Sew across just below the zipper bottom stop, up

to the right side of the zipper teeth. Turn fabric 90º

and stitch through the garment and zipper tape,

guiding the edge of the foot along the zipper teeth.

b Before reaching pull-tab, stop the machine

with needle in fabric and raise the foot. Use seam

ripper to open a few inches of basting stitches,

then unzip a few inches to clear a path for the

stitch.

u Basting stitches

Zipper Sewing (continued)

x Sew through all layers the entire length of the

zipper tape, removing the pins as you go. Stop the

machine about 2” (5cm) before the zipper foot

reaches the pull tab. Lower the needle slightly into

the fabric. Raise the zipper foot and unzip a few

inches to clear a path for the stitches. Lower the

foot and stitch the remainder of the seam.

q Pull tab

w 2” (5cm)

c Remove the fabric and close the zipper. Take the

upper fabric layer and lay it flat on the zipper. Baste

the upper fabric layer to the zipper tape.

e Wrong side of upper fabric

r Basting stitch

t Right side of fabric

y Zipper tape

n Lower the foot and stitch the remainder of the

seam, making sure the fold is even. At the end of

the seam, sew in reverse a few stitches to lock.

Once both sides of zipper are sewn, use seam

ripper to open the basting stitch.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Janome Decor Computer 2010 in the language / languages: English as an attachment in your email.

The manual is 2,72 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Janome Decor Computer 2010 Manual

Product: