Manual Janome Decor Computer 2010 (page 46 of 86) (English)

472826

Zoom out

Zoom in

1/86

←

z Raise the needle and foot. Place the automatic

buttonhole foot with its pin just under the groove of

the foot holder. Lower the presser bar to attach the

foot.

q Groove

w Pin

v Raise the buttonhole foot and draw the needle

thread to the left through the hole on the foot.

Place the fabric under the foot and lower the

needle at the starting point. Then lower the foot.

y Buttonhole mark

u Starting point

i Slider

o No gap

!0 Spring holder

!1 Sewing gap

NOTE:

Make sure there is no gap between the slider and

spring holder, otherwise the left and right length of

the buttonhole will be different.

c Pull the buttonhole lever downward as far as it will

go.

t Buttonhole lever

x Pull the button holder open to the back (A), and

place the button in it. Push the button holder

closed (B) to hold the button.

e Button holder

NOTE:

If the button is extremely thick, make a test

buttonhole. If it is difficult to fit the button through the

test buttonhole, lengthen the buttonhole by pulling

the button holder back to create a gap.

r Gap

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Janome Decor Computer 2010 in the language / languages: English as an attachment in your email.

The manual is 2,72 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Janome Decor Computer 2010 Manual

Product: