472825
56
Zoom out
Zoom in
Previous page
1/60
Next page
52
Press the up/down needle position button to raise the
needle, then unplug the sewing machine.
Remove the cover plate by sliding the cover plate release
button to the right. Take out the bobbin. Brush out dust and
lint. (You may also use a vacuum cleaner.)
z Remove the set screw w on the left hand side of the
needle plate e with the screwdriver q supplied with the
machine. Remove the needle plate e.
x Ta ke out the bobbin. Lift up the bobbin holder y and
remove it.
c Clean the hook with a lint brush.
v Clean the feed dog and hook race with the lint brush.
b Clean the center of the hook race with a dry cloth.
*You may also use a vacuum cleaner.
* The machine does not require oiling.
Assemble the hook race
q Bobbin holder
w Stopper
e Knob
r Needle plate guide pins
t Screwdriver
y Guide holes
z Insert the bobbin holder so that the knob fits next to the
stopper in the hook race.
x Insert the bobbin.
c Attach the needle plate with screw.
After cleaning the machine, make sure the needle and
presser foot are attached.
SECTION V. CARE OF YOUR MACHINE
Clean the hook race and feed dog
q Screw driver
w Set screw
e Needle plate
r Lint brush
t Hook race
y Bobbin holder
u Feed dog
i Soft, dry cloth
q
w
e
y
r
y
r
u
t
i
r
w
e
q
t
y
z
x
c
v
b
zx
c
WARNING:
•Turn the power switch off and unplug the machine
before cleaning.
Do not dismantle the machine other than as explained in
this section.
CAUTION:
Do not store the machine in a high-humidity area, near
a heat radiator, or in directsunlight.
NOTE:
Clean the outside of the machine with a soft cloth and
neutral soap.
After cleaning the machine, make sure the needle and
presser foot are attached.
56


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome DC5100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome DC5100 in the language / languages: English as an attachment in your email.

The manual is 1,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info