472825

Janome DC5100 Manual

49
Zoom out
Zoom in
Previous page
1/60
Next page
45
This machine is equipped with a twin needle that can be
used to sew parallel rows straight on decorative stitches
adding an exquisite touch to table linens and clothing.
Use stitch patterns 01 to 05, 8 to 10, 24, 27 to 30, 33 to 35,
37, 38, 43 to 47, 53, 55, 61 to 63, 65, 67, 70, 72 to 74, 77,
91, 94, and 95.
Insert the additional spool pin, and put the felt and spool on
it with the thread coming off the spool as shown.
When threading the machine for twin needle sewing follow
these instructions making sure you separate the threads,
placing one in each thread guide on the needle bar.
q
e
w
t
y
q wer
NOTE:
• Do not set the stitch width at more than 3, otherwise
the needle may hit the needle plate or presser foot and
could possibly break.
•Turn off and unplug the machine before changing the
needle to the twin needle.
• Use #60 or finer threads for twin needle sewing.
NOTE:
To avoid the thread twisting, it is advisable to thread the
machine one thread at a time.
•Starting to sew
Turn off and unplug the machine before changing the
needle to the twin needle. Insert the additional spool pin,
and put the felt and spool on it with the thread coming off
the spool as shown. Set the stitch width to 3.0 or less.
Turn the handwheel with your hand to check if the needle
does not hit the presser foot or needle plate.
When threading the machine for twin needle sewing
follow this chart making sure you separate the threads,
placing one in each thread guide on the sides of the
needle bar.
Threading from q to e is the same as for single thread.
Refer to page 16.
r Draw the threads down and slide them through
the lower thread guide.
t Slide the threads through the needle bar thread
guide one to each side.
y Thread the needle from front to back.
At corners, raise the needles until they clear the
fabric. Partially raise the presser foot and carefully
pivot the fabric.
When twin needle sewing is completed, change
needle and reset tension (if necessary).
To return to single needle sewing, return the
stitch width to the original setting.
r
Twin needle stitch
q Stitch Pattern: 95
w Thread tension dial: 3 to 6
e Presser foot: Satin stitch foot: F
r Twin needle
… 49 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome DC5100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome DC5100 in the language / languages: English as an attachment in your email.

The manual is 1,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info