472825
42
Zoom out
Zoom in
Previous page
1/60
Next page
38
Bartacking
q Stitch pattern: 19
w Thread tension dial: 3 to 6
e Presser foot: Satin stitch foot: F
Memorizing bartacking
To sew another tack in the same size, simply restart the
machine and it will stop automatically when finished
sewing.
qw e
q
w
e
y
r
q
Tacking is used to reinforce pockets, crotches and belt
carriers where extra stretch is needed. Select pattern 19
and attach the satin stitch foot F.
The machine will sew a tacking of 5/8˝ (1.5 cm) length
automatically.
q 5/8˝ (1.5 cm)
ew
Adjusting the evenness of bartacking
Make a test on an extra piece of fabric to check your
settings. If the bartacking is uneven, adjust the stitch
by turning the feed balancing dial as follows.
Stitch does not meet start position q. Turn dial toward
“+” for even stitch w.
Stitch does not meet return position e. Turn dial toward
“–” for even stitch w.
•To sew a shorter tack
When you sew a tack less than 5/8˝ (1.5 cm) in length,
set the machine to “Low” speed setting.
Sew to the required length w and press the reverse
button e and the machine will memorize the tack
length r.
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome DC5100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome DC5100 in the language / languages: English as an attachment in your email.

The manual is 1,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info