472831
34
Zoom out
Zoom in
Previous page
1/43
Next page
32
qwe
Bartacking
q Stitch pattern:
w Thread tension dial: A
e Presser foot: Satin stitch foot: F
Tacking is used to reinforce pockets, crotches and belt
carriers where extra stretch is needed.
The machine will sew a tacking of 1.5 cm (5/8˝) q length
automatically.
The dot r will blink when the bartacking is finished, and
the machine will memorize the tack length.
To sew another tack in the same size, simply restart the
machine and it will stop automatically when finished
sewing.
To change the tack length, press the stitch pattern
selection key. The blinking dot will disappear.
q 1.5 cm (5/8˝)
w Start point
e End point
r Dot
q
t
y
u
i
o
!0
w
e
r
!1
!2
!3
To sew a shorter tack
When you sew a tack less than 1.5 cm (5/8˝) in length,
sew to the required length t and press the reverse
button y. The machine will memorize the tack length u.
t Required length
y Reverse button
u Tack length
i Starting point
• Adjusting the evenness of bartacking
Make a test on an extra piece of fabric to check your
settings. If the bartacking is uneven, adjust the stitch
by turning the feed balancing dial !1 as follows.
• Stitch does not meet start position o. Turn dial toward
“+” for even stitch.
• Stitch does not meet return position !0. Tu rn dial toward
“–” for even stitch.
o Start position
!0 Return position
!1 Feed balancing dial
!2 Standard setting mark
!3 Indication line
34


Need help? Post your question in this forum.

Forumrules
1

Forum

janome-dc4030

Reset search

  • i just got a janome model DC4030PR is the same as the DC4030 thanks Submitted on 30-1-2024 at 01:14

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome DC4030 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome DC4030 in the language / languages: English as an attachment in your email.

The manual is 0,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Janome DC4030

Janome DC4030 User Manual - Dutch - 43 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info