472832
16
Zoom out
Zoom in
Previous page
1/42
Next page
14
Securing a seam
For fastening the beginning of a seam, press the
reverse button and sew several reverse stitches.
Release the reverse button to sew forward.
w Reverse button
For fastening the ends of a seam, press the reverse
button at the end of the seam.
Sew a few stitches in reverse to fasten the seam.
Raise the presser foot and pull the fabric to the back
to remove it.
To cut the threads, pull the fabric to draw the threads
up to the thread cutter as shown.
The threads are cut a proper length to start the next
seam.
e Thread cutter
When pattern #03 (lock-a-matic stitch) is selected:
The machine will sew reverse stitches at the
beginning of a seam automatically, and at the end of
the seam by pressing the reverse button once.
q
e
w
BASIC STITCHES
Straight Stitch
To sew
Raise the presser foot and position the fabric next to
a seam guide line on the needle plate. Lower the
needle into the fabric where you wish to start.
Pull the needle and bobbin threads to the back.
Lower the presser foot.
Depress the foot control to start sewing. Gently guide
the fabric along the seam guide line.
Changing sewing direction:
Stop the machine a few stitches before the end of a
seam. Press the up/down needle button a few times
until the needle falls on the end of the seam.
q Up/Down needle button
Raise the presser foot.
Pivot the fabric around the needle to change the
sewing direction as desired.
Lower the presser foot and start sewing in a new
direction.
q
w
Machine Settings
q Pattern: #01
w Presser foot: Zigzag foot A
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome DC3050 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome DC3050 in the language / languages: English as an attachment in your email.

The manual is 0,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info