602047
76
Zoom out
Zoom in
Previous page
1/94
Next page
70
Smocking
Machine setting
q Pattern
w LED display
e Foot F: Satin stitch foot
qw e
e
q
qwe
qwe
Cross Stitch
Machine setting
q Pattern
w LED display
e Foot F: Satin stitch foot
Fagoting
Machine setting
q Pattern
w LED display
e Foot F: Satin stitch foot
Set the thread tension dial at 1–3, and stitch length at
3–4, sew straight lines 1 cm (3/8") apart across the
area to be smocked.
Knot the needle and bobbin threads along one edge w.
Pull the bobbin threads e and distribute gathers
evenly.
Sew lines of the decorative pattern between the
straight seams. Pull out the gathering stitches.
q 1 cm (3/8")
Fold under 1.5 cm (1/2") on each fabric edge and
press. Pin the two edges to a piece of paper 0.3 cm
(1/8") apart.
Sew guiding the fabric so the needle catches the
folded edge on each side.
Peel off the paper from fabrics.
You can make beautiful designs with this embroidery
stitch pattern, in half the time it would take if
embroidered by hand.
• Starting to sew
Choose a plain close weave fabric such as linen or
wool flannel for the background fabric. If you choose
light weight fabric, use a tear away backing for
support.
Adjust the stitch width as you desire to match the
pattern.
Sew outward from the center of the design.
Use the placement arrow “” on the foot F to insure
straight, even rows.
w
76


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome DC2011 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome DC2011 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 2,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info