602047
66
Zoom out
Zoom in
Previous page
1/94
Next page
60
Zipper Sewing
Machine setting
q Pattern
w LED display
e Foot E: Zipper foot
qw e
Attaching the zipper foot
To sew on the left side of the zipper, attach the foot
holder to the right pin on the zipper foot.
To sew on the right side of the zipper, attach the
foot holder to the left pin on the zipper foot.
q Groove
w Pin
e To sew left side
r To sew right side
Fabric preparation
Add 3/8” (1cm) to the zipper size. This is the
overall opening size.
q Right side of fabric
w Opening size
e Zipper size
r 3/8” (1 cm)
t End of opening
y Slider
u Zipper teeth
i Zipper tape
Place right sides of fabric together and sew a bottom
seam 3/4” (2 cm) from the fabric edge to the esti-
mated zipper bottom stop position.
Sew in reverse a few stitches to lock.
Increase the stitch length to 5.0, set the needle thread
tension to 0, and baste the entire length of the zipper
opening.
o Bottom seam
!0 Zipper bottom stop position
!1 Reverse stitch
!2 Basting stitch
!3 3/4” (2 cm)
Starting to sew
z Attach the zipper foot on the right-hand side of the
pin.
Fold back the upper layer seam allowance. Fold
back the lower layer seam allowance to form a 1/8”
(0.3 cm) margin of the fabric. Place the zipper teeth
next to margin edge and pin margin to the zipper
tape.
Return the stitch length and thread tension to the
original settings.
Lower the zipper foot so it aligns with the zipper
teeth.
Sew from the bottom stop to the entire length of the
zipper tape, removing pins as you go.
q Upper layer w Lower layer
e 1/8” (2 cm) margin r Margin edge
t Bottom stop y Zipper length
q
w
e
r
q
we
t
u
i
r
y
o!0
!1
!2
!3
q
r
t
y
w
e
z
66


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome DC2011 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome DC2011 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 2,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info