602076

Janome DC2007LE Manual

24
Zoom out
Zoom in
Previous page
1/83
Next page
20
Winding the Bobbin
Removing the bobbin
z Slide the hook cover plate release button to the
right, and remove the hook cover plate.
q Hook cover plate release button
w Hook cover plate
x Lift out the bobbin from the bobbin holder.
e Bobbin
Setting the spool of thread
Lift up the spool pin. Place the spool of thread on the
spool pin with the thread coming off the spool as
shown.
q Large spool holder
Attach the large spool holder, and press it firmly
against the spool of thread.
Use the small spool holder to hold narrow or small
spools of thread.
w Small spool holder
Additional spool pin
Use the additional spool pin for winding a bobbin
without unthreading the machine. The additional spool
pin is also for twin needle sewing.
Insert the additional spool pin into the spool stand
and then into the hole in the machine.
Place the felt on the spool pin and place a spool of
thread on it as shown.
e Additional spool pin
r Felt
t Hole
y Spool stand
Threading for bobbin winding
z Set the speed control lever at .
Guide the thread around the thread guide.
u Thread guide
x Pass the thread through the hole in the bobbin
from the inside to the outside. Put the bobbin on
the bobbin winder spindle.
i Bobbin winder spindle
c Push the bobbin winder spindle to the right.
The indicator will show .
v Hold the free end of the thread in your hand and
depress the foot control.
Stop the machine after the bobbin has spun
several times, and cut the thread close to the hole
in the bobbin.
b Depress the foot control again. When the bobbin
is fully wound, it will stop automatically.
Release the foot control and return the bobbin
winder spindle to its original position by moving it
to the left, and cut the thread with a pair of
scissors. Remove the bobbin from the bobbin
winder spindle.
NOTE:
The machine will not sew until the spindle has been
returned to the left.
q
w
e
q
w
e
r
y
t
u
i
z
x
xc
vb
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome DC2007LE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome DC2007LE in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 1,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info