472818
21
Zoom out
Zoom in
Previous page
1/48
Next page
19
q
ew
Straight Stitch Sewing
q Stitch pattern: 00 or 01
w Needle thread tension: 2 to 6
e Presser foot: Zigzag foot A
• Starting to sew
Raise presser foot and position the fabric next to a seam
guide line on the needle plate (5/8˝ (1.6 cm) is most
common). Lower the needle to the point where you want
to start. Lower the presser foot and pull the threads
toward the back. Start the machine. Gently guide the
fabric along a seam guide line letting the fabric feed
naturally.
• Changing sewing direction
Stop the machine and bring the needle down into the
fabric by pressing the needle up/down button q.
Raise the presser foot.
Pivot the fabric around the needle to change the sewing
direction as desired. Lower the presser foot.
q Needle up/down button
SECTION III. BASIC SEWING
w
• Finishing sewing
To fasten the ends of a seam, press the reverse stitch
button w and sew several reverse stitches. Raise the
presser foot. Remove the fabric, draw the threads to the
back and cut them with the thread cutter e. The
threads are cut a proper length to begin sewing the
next seam.
w Reverse stitch button
e Thread cutter
e
• Turning square corners
When sewing with fabric edge at 5/8˝ seam guide, to turn
a square corner so that sewing continues at same
distance from edge.
Stop the machine when front edge of fabric reaches the
cornering guide lines q.
Lower the needle by pressing needle up/down button w.
Raise the presser foot and turn the fabric counterclock-
wise 90°.
Lower the presser foot, and begin stitching in the new
direction.
q Cornering guide
w Needle up/down button
w
q
q
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome DC1050 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome DC1050 in the language / languages: English as an attachment in your email.

The manual is 1,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info