602020
58
Zoom out
Zoom in
Previous page
1/63
Next page
56
¡ Cleaning the Bobbin Holder
Loose threads and dust may cause puckered stitches
and thread breakage during stitching. Check for lint
build-up after each garment is completed.
Turn off the power switch or unplug the machine.
z Remove the cover plate by sliding the hook cover
plate release button to the right.
x Take out the bobbin, brush out dust and lint. (You
may also use a small vacuum cleaner.)
c Insert the bobbin and attach the hook cover plate.
z
x
c
zx
c
v
q
w
e
r
¡Replacing the Light Bulb
How to remove
Open the face plate and pull out the lamp socket, then
gently pull out the lamp.
q
Face plate
w
Lamp socket
e
Lamp
To replace
Insert the lamp being careful to match the holes and pins.
Attach the lamp socket and close the face plate.
r
Pin
Note:
To replace the light bulb, turn off the power supply
and remove power the cord from the wall outlet.
Remove the light after it has cooled down.
¡ Exposing the Hook Race
z Unplug the machine and remove the presser foot
and needle.
x Remove the screw on the left side of the needle
plate with the screwdriver supplied with the
machine.
c Remove the needle plate and take out the bobbin.
v Lift up the bobbin holder and remove it.
58


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome 8100 Harmony at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome 8100 Harmony in the language / languages: English as an attachment in your email.

The manual is 1,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info