602020
12
Zoom out
Zoom in
Previous page
1/63
Next page
10
w
q
Threading the Machine
¡ Threading the Machine
z Raise the presser foot lifter. Press the up/down
needle button twice to raise the needle (see page 10).
Hold the upper thread as shown and pass the
thread under the thread guide
q
.
Guide the thread around thread guide
w
as
shown.
Pull the thread down and around the check spring
holder from right to left, then pull up the thread.
x Firmly draw the thread from right to left into the
eye of the take-up lever.
Then down through the lower thread guide.
c Slide the thread behind the needle bar thread guide
from the left.
Thread the needle from front to back or use the
needle threader.
q
Thread guide
w
Thread guide
z
x
cv
¡ Needle Threader
z Raise the needle to its highest position. Pull down
the needle threader knob as far as it will go.
x Turn the knob in the direction of the arrow in the
illustration, then insert Hook
q
into the needle
eye. Lead the thread around Guide
w
and under
Hook
q
.
c Turn the knob in the direction of the arrow in the
illustration, drawing the thread loop through the
needle.
v Pull the thread through the needle eye.
* The needle threader can be used with a #11 to
#16 needle or a Janome Blue Tip needle. Thread
size 50 to 100 should also work well.
q
Hook
w
Guide
x
c
z
w
q
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome 8100 Harmony at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome 8100 Harmony in the language / languages: English as an attachment in your email.

The manual is 1,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info