Manual Janome 8002D (page 3 of 42) (English)

603680

Zoom out

Zoom in

1/42

Do’s and Don’ts

1. Always be aware of the up-and-down movement of the needle and do not turn your attention

away from the machine while it is running.

2. When leaving the sewing machine unattended, the main switch of the machine must be

switched off or the plug must be removed from the socket-outlet.

3. When servicing the sewing machine, or when removing covers or changing lamps, the machine

must be disconnected from the power supply by removing the plug from the socket-outlet.

4. Do not place anything on the foot control, otherwise the machine will start inadvertently, or the

control or motor may burn out.

5. The maximum permissible power for the sewing lamp bulb is 15 watts.

6. When using your sewing machine for the first time, place a piece of waste fabric under the

presser foot and run the machine without thread for a few minutes. Wipe away any oil which

may have appeared.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Janome 8002D in the language / languages: English as an attachment in your email.

The manual is 1,5 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Janome 8002D Manual

Product: