472844
22
Zoom out
Zoom in
Previous page
1/32
Next page
21
qwe
E: Zipper Foot
0.2~0.3 cm
Wrong
side of
fabric
Machine Setting
Stitch Length
1.5 ~ 4
End of opening
Right
side of
fabric
Top edge of fabric
<<Fabric Preparation>>
Put the right side of the fabric together and sew to the end of
the zipper opening. Use the reverse to lock the stitches.
Baste the zipper opening with stitch length at “4” and top thread
tension at “3”.
The pin on the
left hand side
<<To attach the zipper foot>>
To sew on the left side of the
zipper, attach the zipper foot
with the pin on the right hand
side.
To sew on the right side of
the zipper, attach the zipper
foot with the pin on the left
hand side.
Zipper teeth
Zipper tape
<<To Sew>>
q Set the stitch length at 2 and
the top thread tension at
“AUTO”. Fold back the left
seam allowance as shown.
w Turn under the right seam
allowance to form a 0.2 to
0.3 cm (1/8˝) fold.
e Place the zipper teeth next
to the 0.2 to 0.3 cm (1/8˝)
fold with the bottom end of
the zipper matching the
bottom end of the zipper
opening. Pin in the place.
Zipper Application
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome 712T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome 712T in the language / languages: English as an attachment in your email.

The manual is 0,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info