602049
44
Zoom out
Zoom in
Previous page
1/52
Next page
42
1
2
3
9
0
Auto
2
1
4
3
1
2
3
9
0
Auto
30
31
Smocking
Machine setting
Pattern #30
Foot F: Satin stitch foot
Thread tension Auto
The patterns #51 to #55 can also be used.
1. Set the thread tension dial at 1-3, and stitch length at
3-4, sew straight lines 1 cm (3/8˝) apart across the
area to be smocked.
Knot the needle and bobbin threads along one edge.
Pull the bobbin threads and distribute gathers evenly.
2. Sew lines of the decorative pattern between the
straight seams. Pull out the gathering stitches.
1 cm (3/8˝)
Knot both treads
Bobbin thread
Decorative Satin Stitches
Machine setting
Pattern #31
Foot F: Satin stitch foot
Thread tension Auto
The patterns #32 to #42 can also be used.
For fine and stretch fabrics, use an adhesive type
stabilizer or a piece of paper on the wrong side of the
fabric to prevent puckering.
NOTE: Press the auto lock button while sewing the last
unit of the pattern so the machine will stop
automatically after finishing the last unit.
1
2
3
1
2
3
1
1
2
3
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome 6260 QC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome 6260 QC in the language / languages: English as an attachment in your email.

The manual is 0,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info