602049
33
Zoom out
Zoom in
Previous page
1/52
Next page
31
9
0
Auto
1
2
3
17
Auto
Step 1
Step 2
Step 3
Step 4
1 2 3
1
2
A
#17 Square buttonhole (Auto buttonhole)
Machine setting
Pattern #17
Foot R: Automatic buttonhole foot
Thread tension Auto
Mark the buttonhole position on the fabric. Pull the
button holder all the way out.
Draw the needle thread to the left through the hole on
the foot.
Place the fabric under the foot and lower the needle at
the starting point by turning the handwheel. Lower the
foot.
Button holder
Starting point
NOTE: You do not need to pull down the buttonhole
lever.
Depress the foot control and follow the steps below.
Step 1: Sew up the left row to the desired buttonhole
length and stop the machine. Press the reverse
stitch button.
Step 2: Depress the foot control again. The machine will
automatically tack and sew down the right row.
Stop the machine when you return to the starting
point. Press the reverse stitch button.
Step 3: Depress the foot control again. The machine will
sew the front bartack and stop automatically.
Step 4: After the buttonhole is completed, a blinking dot
will appear on the LED display. Raise the presser
foot.
NOTE: The blinking dot indicates that the buttonhole
length has been memorized. If you wish to alter
the stitch density, you need to re-select the auto
buttonhole and repeat the above steps with a
new stitch setting.
To sew buttonholes in the same size, simply
depress the foot control. Keep the foot control
depressed and the machine will sew the same
sized buttonhole and stop automatically.
You do not need to press the reverse stitch
button.
The LED display shows “ 0 ” while sewing.
4
1
2
3
4
2
3
1
1
2
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome 6260 QC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome 6260 QC in the language / languages: English as an attachment in your email.

The manual is 0,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info