602049
19
Zoom out
Zoom in
Previous page
1/52
Next page
17
UTILITY STITCHES
Straight Stitch
Machine setting
Pattern #1
Foot A: Zigzag foot
Thread tension Auto
Starting to sew
Raise the presser foot and place the fabric on the
machine.
Lower the needle into the fabric where you want to start.
Lower the presser foot and start sewing.
NOTE: To fasten the beginning of the seams, sew
several reverse stitches by pressing the reverse
stitch button, or use pattern #02 (Lock-a-Matic
stitch).
Changing sewing direction
Stop the machine and bring the needle down into the
fabrics by pressing the needle Up/Down button.
Raise the presser foot.
Pivot the fabric around the needle to change the sewing
direction as desired.
Lower the presser foot and start sewing in a new
direction.
Needle Up/Down button
Fastening the seam
Sew several stitches in reverse by pressing the
reverse stitch button to fasten the end of seam.
NOTE: If you use pattern #02 (Lock-a-Matic stitch),
press the reverse stitch button once and the
machine will sew in reverse and stop
automatically.
Revers stitch button
Raise the presser foot and pull the fabric to the rear.
Draw the threads up and into the thread cutter. The
threads are cut at the proper length for starting the
next seam.
Thread cutter
01
9
0
Auto
1
2 3
1
2
3
1
2
3
1
2
3
3
1
2
3
1
2
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome 6260 QC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome 6260 QC in the language / languages: English as an attachment in your email.

The manual is 0,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info