523331
13
Zoom out
Zoom in
Previous page
1/34
Next page
11
Balancing Needle Thread Tension
1
2
3
4
5
6
1 Correct tension
The thread tension is adjusted depending on the
sewing materials, layers of fabric and other sewing
conditions.
* The ideal straight stitch has threads looked between two
layers of fabric, as illustrated (magnifies to show detail).
* For an ideal zigzag stitch, the bobbin thread does not
show on the right side (top side) of the fabric, and the needle
thread shows slightly on the wrong side (bottom side) of
the fabric.
2
Needle thread tension is too tight
If the bobbin thread (bottom thread) appears on the
right side (top side) of the fabric, loosen the needle
thread tension by moving the dial to a lower number.
3
Needle thread tension is too loose
If the needle thread (top thread) appears on the wrong
side (bottom side) of the fabric, tighten the needle
thread tension by moving the dial to a higher number.
1
Needle thread (Top thread)
Bobbin thread (Bottom thread)
Right side (Top side) of fabric
Wrong side (Bottom side) of fabric
Thread tension dial
Setting mark
2
3
4
5
6
1
2
3
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome 423S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome 423S in the language / languages: English as an attachment in your email.

The manual is 0,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info