523330

Janome 419S Manual

22
Zoom out
Zoom in
Previous page
1/34
Next page
20
Buttonhole
Pattern selector:
Presser foot: Automatic buttonhole foot
Thread tension: 1–5
Stitch length: (0.5–1)
Stitch width: 5
4
1
2
3
4
1
2
3
5
5
1
2
3
4
5
6
1 Turn the handwheel toward you to raise the needle to
its highest position.
Raise the presser foot lifter.
2 Select the pattern "BH" by turning the pattern selector
dial.
If the BH pattern is already selected, reset the dial once
according to the procedure in 12 .
3 Attach the automatic buttonhole foot.
4 Pull the button holder to the back, and place the button
in it. Push back the button holder toward you as far as
it will go.
5 Pull the buttonhole lever downward as far as it will go.
Buttonhole lever
6 Insert fabric under the foot.
Turn the handwheel slowly towards you with your right
hand until the needle goes down and continue turning
handwheel until the take-up lever is at its highest position.
7 Remove the fabric to the left to draw both threads to
the left.
8 Insert the garment under the foot, and lower the needle
at the starting point.
Then lower the automatic buttonhole foot.
Note : Make sure there is no gap between the slider and the
spring holder. If there is a gap, the length of the rows
will be different, as shown.
Starting point
Slider
There should be no gap
Spring holder
Difference
* The size of buttonhole is automatically set by placing
the button in the automatic buttonhole foot.
* The button holder of the foot takes a button size up to
2.5 cm (1") in diameter.
* Make a test buttonhole on a sample duplicating the
fabric, interfacing and seams of the actual garment.
* Place the button on the fabric sample and mark the
top and bottom to determine the position of buttonhole.
* Use interfacing on stretch fabrics.
1 2 3
4
5
6 78
1
2
3
4
5
6
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome 419S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome 419S in the language / languages: English as an attachment in your email.

The manual is 0,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info