472821
35
Zoom out
Zoom in
Previous page
1/48
Next page
33
q
ew
q
r
t
w
r
e
Tacking
q Stitch pattern: 58
w Thread tension dial: 3 to 6
e Presser foot: Satin stitch foot F
Tacking is used to reinforce pockets, crotches and belt
carriers where extra strength is needed.
• Start sewing
Start the machine and sew until the machine stops
automtaically. The machine will sew a tacking 5/8˝
(1.5 cm) long.
q 5/8˝ (1.5 cm)
The machine will trim the threads at the end of sewing
automatically if the thread cutter sign is indicated on the
LCD display (see page 7).
• Sewing a shorter tack
* Set the speed control slider at low speed setting.
To sew a tack shorter than 5/8˝ (1.5 cm), first stop the
machine after sewing the required length w, then press
the reverse stitch button e.
The tack length r has been determined.
Start the machine again and continue sewing until the
machine stops automatically.
w Required length
e Reverse stitch button
r Ta ck length
t Starting point
• Sewing a same-size darning
Simply start the machine to sew another tack at the
same size.
q
ew
Eyelet
q Stitch pattern: 59
w Needle thread tension: 1 to 4
e Presser foot: Satin stitch foot F
The eyelet is used for belt holes etc.
• Starting to sew
Attach the satin stitch foot F.
Start the machine. The machine will stop
automatically when completed.
The machine will trim the threads at the end of sewing
automatically if the thread cutter sign is indicated on the
LCD display (see page 7).
Open the eyelet with an awl, eyelet punch or pointed
scissors.
w
e
q
Adjusting the shape of an eyelet
Correct the shape of the eyelet as follows:
Press the cursor buttons to move the cursor under
the value “L3” (default setting) q.
If the eylet gap opens w, press the button to make
the darn even. (L1~L2)
If the eylet overlaps e, press button to make the darn
even. (L4~L5)
NOTE:
The shape can be adjusted within L1 to L5 (default
setting is L3).
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome 3160 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome 3160 in the language / languages: English as an attachment in your email.

The manual is 4,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info