602078
40
Zoom out
Zoom in
Previous page
1/48
Next page
38
q
ew
Scallop Stitch
q Stitch pattern: 41
w Thread tension dial: 3 to 6
e Presser foot: Zigzag stitch foot A
Sew the stitches approximately 3/8˝ (1 cm) inside the
edge of the fabric.
Tr im the outside of the stitches as shown. Make sure
you don’t cut the thread.
q
ew
Applique
q Stitch pattern: 17 or 18
w Needle thread tension: 1 to 4
e Presser foot: Satin stitch foot F
r Presser foot pressure dial: 3
r
Adjusting the stitch width
Select pattern 17.
Press the cursor buttons to move the cursor under
the stitch width value “3.5” e (default setting).
Press the button to decrease the stitch width r.
Press the button to increase the stitch width t.
The stitch width will be varied base on the centered
needle drop position y.
e Stitch width (3.5)
r Stitch pattern 17 (stitch width decreased)
t Stitch pattern 17 (stitch width increased)
y Center needle drop position
e
r
t
y
w
q
* The stitch width of pattern 17 can be changed without
changing its center needle position.
* The stitch width of pattern 18 can be changed without
changing its left needle position.
Place an applique on the fabric and baste or pin it in
place.
Reduce the foot pressure.
Sew while guiding the fabric so the needle falls along the
outer edge of the applique.
q Applique
w Outer edge
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome 2160DC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome 2160DC in the language / languages: English as an attachment in your email.

The manual is 4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info