602078
10
Zoom out
Zoom in
Previous page
1/48
Next page
8
Presser Foot Pressure Dial
The presser foot pressure dial should be set at “6” for
regular sewing.
Reduce the pressure to “3” for applique, cutwork, drawn
work, basting and embroidery.
Set the pressure to “2” to “4” when sewing chiffon, lace,
organdy and other fine fabrics.
Velour and knits with a lot of stretch may also require a
“1” setting.
Tu rn the presser foot pressure dial q and set the desired
number at the setting mark w.
q Presser foot pressure dial
w Setting mark
Presser Foot Lifter
The presser foot lifter q raises and lowers the presser
foot.
You can raise the foot about 1/4˝ (0.6 cm) higher than the
normal up position w for easy removal of the presser
foot, or to help you place thick material under the foot.
q Presser foot lifter
w Normal up position
e Highest position
q
w
e
w
e
w
q
Removing and Attaching the Foot Holder
q
w
e
w
q
z
x
Changing the Presser Foot
q
w
e
Removing the foot holder
Remove the setscrew q by turning it counterclockwise
with a screwdriver.
Attaching the foot holder
Match the hole in the foot holder w with the threaded
hole in the presser bar e. Fit the setscrew q into
the hole. Tighten the setscrew q by turning it clockwise
with a screwdriver.
q Setscrew
w Foot holder
e Presser bar
CAUTION:
Turn OFF the power switch before changing the foot .
Always use the proper foot for the selected pattern.
The wrong foot can cause the needle to break.
Removing the presser foot
Raise the needle to its highest position by turning the
handwheel counterclockwise. Raise the presser foot,
and press the lever q on the back of the foot holder.
Attaching the presser foot
Place the selected presser foot so that the pin e on
the foot lies just under the groove w on the foot
holder. Lower the presser bar to lock the foot into
the place.
q Lever
w Groove
e Pin
CAUTION:
Turn OFF the power switch before detaching or
attaching foot holder.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome 2160DC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome 2160DC in the language / languages: English as an attachment in your email.

The manual is 4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info