588891
22
Zoom out
Zoom in
Previous page
1/44
Next page
20
Needle Plate
The seam guides on the needle plate and the hook cover
help you to measure seam allowance. The numbers on
the needle plate indicate the distance between the
center needle position q and the edge of the fabric w.
q Center needle position
w Edge of the fabric
q
w
Number
Distance
(cm)
Distance
(inch)
10 15 30 40 3/8 1/2 5/8 1 1 1/2
1.0 1.5 3.0 4.0
3/8 1/2 5/8 1 1 1/2
———
—————
q
e
[1.0] [2.2] [5.0]
q
wer
Adjusting the stitch length
Press the cursor buttons to move the cursor q
under the stitch length value “2.2” w (default setting).
Press the button to decrease stitch length.
Press the button to increase stitch length.
The stitch length can be varied from 0.0 to 5.0.
q Cursor
w Stitch length (2.2)
NOTE:
Reverse stitch length cannot be set longer than 4.0.
w
q
Adjusting the needle drop position
The needle drop position can be adjusted for straight
stitch patterns 00~04, and 18~19.
Press the cursor buttons to move the cursor
under the stitch width value “3.5” q (default setting).
Press the button to move the needle to the right r.
Press the button to move the needle to the left w.
q Stitch width (3.5)
w Left (0.0)
e Middle (3.5)
r Right (7.0)
The front seam guides e are marked at 1/4˝, 3/8˝ and
5/8˝ from the center needle position q.
e Front seam guides
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome 1860 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome 1860 in the language / languages: English as an attachment in your email.

The manual is 4,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info