To change from position 1 to 2, unfasten the side clasps that are found near both sides of the baby's head, use your thumb and index finger to press on both
sides of the clasp, and repeat the same operation for both sides and then again for the clasps situated below the ones you have unfastened. You can unfasten
the side straps that are in the holes around the baby's legs so that changing position is more comfortable for you and your baby. When the carrier is fully open,
you can take your baby out comfortably and safely. To change from position 1 to 2, with the baby carrier fully open, position the baby facing forwards and place
his legs through the lower holes of the carrier. When the baby is in place, fasten the clasps under the baby's head on both sides and pull the straps so they fit
the baby's body correctly. Repeat the same operation for the top clasps, and lastly, fold the headrest outwards and fasten it to the body of the carrier with the
hook on the middle part, so it does not bother the child when in position 2.
PLACING THE BABY IN THE BABY CARRIER WORN ON THE BACK:
Before placing the baby in the baby carrier, make sure that all the securing systems are correctly fastened. Check them and adjust them to fit your body
before placing the baby in the carrier. Get help from another person to place the baby in and out of the baby carrier. Once the baby is in the baby carrier
make sure that he is correctly secured before using the product. (See figure 12, page 4).
WARNING ABOUT PRODUCT WEAR AND TEAR:
This product is susceptible to normal wear and tear over time. The user should inspect this product before each use to look for any signs of damage, like rips or
parts coming loose.
WASHING INSTRUCTIONS
•
To keep baby carrier looking new longer, we recommend that regular care be limited spot cleaning with a damp cloth. Machine wash only if necessary. Machine
wash
separately in cold water, gentle cycle. Drip dry only. No bleach or fabric softener. Do not use dryer. Do not iron.
•Baby carrier TRAVEL of Jané, complies with European Standard EN 13209-2: 2015 (Baby carrier backpack). DESIGNED IN SPAIN - MADE IN CHINA.
•Put the baby carrier on by passing the upper straps over your head. See figure 1 on page 4. Check that the straps are supported on your shoulders and that the safety
cross is on your back.
•Adjust the lower back strap using the Velcro so that it fits snugly around your waist and fasten the safety clip. (See figure 2, page 4). Pull both ends of the rear straps
so that they are fitted evenly to the adult’s body. (See figure 3, page 4).
•Make sure that the clasps and straps used to position the baby’s legs are unfastened so you can put the child in the carrier quickly and easily. (See figure 4, page 4)
•Place the baby in the carrier checking that his legs go through the correct side holes at the bottom. (See figure 5, page 4)
•Fit the straps on both sides to the buttons on the carrier by the baby’s legs, so they are held snugly. This button should be fastened when the baby weighs between
3.5 and 4.5 Kilos. (See figure 6, page 4)
•Then hold the baby against you until you have fastened the baby carrier correctly with all the clasps on the front sides of the carrier (See figure 7, page 4).This includes
the clasps that secure the child to your body as well as those that hold the child’s head. Check that the baby’s arms go through the correct gaps as shown in the
photograph. (See figure 9, page 4)
•Adjust the headrest with the side clasps, repeating the same action. This headrest should be used in position 1 and when the baby weighs between 3.5 and 4.5 Kilos.
(See figure 8, page 4)
•Adjust the straps so that the baby is positioned quite high up, close to your chest. To check that the baby is at the right height, check that you can kiss the baby’s head
easily. Make sure that the belt buckle is fastened properly and fits around your waist snugly so it doesn’t move when you walk (See figure 2, page 4). Check that the
baby’s arms go through the right holes and that his face is not too close to the carer’s body to make sure that air can pass through easily, as this could cause a risk of
suffocation for the baby (See figure 9, page 4)
•For position 1, unfasten the central zip at the bottom before positioning the baby facing the carer. This position helps to strengthen the baby’s inner thigh muscles
as his knees are level with the carer’s hips. (See figure 10, page 4)
INSTRUCTIONS FOR USE
• Unfasten the central zip at the bottom when the baby is in position 1
facing the carer, this helps the baby’s hips to develop as his legs are open
wider helping to strengthen the thigh muscles.
IMPORTANT:
Only use the zip in this position (baby facing the carer).
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Jane Travel at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Jane Travel in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.
The manual is 0,48 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
