769068
26
Zoom out
Zoom in
Previous page
1/144
Next page
26
RIDER
Before using the RIDER pushchair for the first time it is neces-
sary to fit the rear wheels. To fit the wheels press the button
on the middle of the wheel and insert the axle into the rear
wheel bearer and push until it slots firmly into place. 1
If you need to remove the wheels, press the central button
and take the wheel off. 2
The chassis of your pushchair includes the PRO-FIX system,
ready to incorporate the following auto safety elements: Mi-
cro, Transporter, Matrix Light and Strata. 8-8.a The PRO-FIX
system makes it easier to attach and remove these accessories
to and from the chassis, securing them to the chassis in a
quick, simple and safe way. To do this follow the instructions
for these accessories carefully.
WARNING: You must make sure that the child is kept away from
the pushchair while it is being folded or unfolded. During the-
se operations the appearance of sharp points and compression
areas are inevitable.
1.- FITTING AND REMOVING THE WHEELS
Your RIDER is fitted with the pro-fix system. With this sys-
tem, the RIDER hammock can be attached perfectly to the
chassis. What’s more, the hammock is reversible so it can be
positioned facing you or facing forwards. 8 - 8.a To take the
hammock off, simultaneously pull the unlocking levers situa-
ted on both sides of the hammock. 9
4.- FITTING AND REMOVING THE HAMMOCK
2.- FOLDING AND UNFOLDING
The hammock can be reclined so your baby can travel in the
most comfortable position possible at all times. Pull the lever
on the upper part of the hammock and tilt it to one of the 3
possible positions. 10
5.- ADJUSTING THE ANGLE OF THE HAMMOCK
3.- PRO-FIX SYSTEM
WARNING: It is necessary to remove the hammock from the
pushchair to attach any of the auto accessories.
To unfold your RIDER, lightly press the bar on the back to tilt
the buggy and make it easier to manoeuvre. 3 Then hold the
handlebar with one hand while you press the locking pedal
at the bottom on the right. 4 Pull the handlebar and unfold
until it clicks and locks into place. 5
To fold your RIDER place the hammock in the folding position
(P) (see ADJUSTING THE ANGLE OF THE SEAT). 6
Then pull the two slide catches on the sides and push the
handlebar forwards until the pushchair is completely folded.
7 – 7.a
When folding the pushchair it is useful to place the hammock
facing forwards as this makes it fold up more compactly.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jane Rider at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jane Rider in the language / languages: All languages as an attachment in your email.

The manual is 2,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info