32
CROSS REVERSE
Your CROSS REVERSE has a safety harness so that your child
is always safe.
To get the protector out, press the button situated on the
lower part of the armrest.
Once it is out, put the covers in place designed to cover up the
holes of the protector.
These covers have two functions, an aesthetic one as they
hide the hole and a safety one as they prevent the child from
putting his fingers in the hole.
Do not use the protector when the hammock is in the rever-
sible position, as the pushchair can not be folded in this posi-
tion with the protector on.
The backrest of the CROSS REVERSE can be reclined to make the
child more comfortable. The reclining system has 3 positions.
Pull the rear lever while you lower the backrest.
To raise it there is no need to press the lever, simply push the
backrest as it is fitted with a free movement mechanism.
It is possible to activate the safety lights on your CROSS RE-
VERSE so you can be seen in poor visibility conditions.
Press the button to activate this device.
There are 3 types of light sequences programmed to be acti-
vated each time you press the button.
(Flashing – Permanent light - Sequential.)
The fourth time you press the button the lights will turn off.
If the level of lighting is low you should change the batte-
ries.
To do this remove the screws on the cover and replace the 1.5
V AAA batteries.
The position of the footrest can also be adjusted to suit the
child’s position. It has 4 different positions.
Press button A situated on the footboard on both sides of the
pushchair while you move the footrest downwards.
To move it upwards you don’t need to press the button as it
has a free movement mechanism.
9.- SEAT BELT
13.- PROTECTOR
11.- ADJUSTING THE BACKREST
10.- SAFETY LIGHTS
12.- ADJUSTING THE FOOTREST
WARNING: The child should be kept away from the mobile parts
when the responsible adult is handling these. The appearance
of cutting, compression and pinch points are inevitable during
these operations.
10
11
12
13
10.a 10.b
11.a
12.a
13.a
13.b
9
