707670
4
Zoom out
Zoom in
Previous page
1/15
Next page
JAcobus handleiding 2015-V13 NL Pagina 2 van 13
1.4 Ombouw van boven naar achteruitvoer
Indien u de kachel als model met bovenuitvoer (Tekening 2.0+2.01) gaat aansluiten is de kachel
klaar voor plaatsing (controleer de positie van de vlamplaat, zie Tekening 1). Plaats het ronde
convectieschild achter de kachel zoals aangegeven op pag.3, tekening 2.0(1) Is het model met
achteruitvoer gewenst dan staan hieronder de uit te voeren handelingen beschreven, zie ook
Tekening 2.1+2.2:
Open de deur van de kachel.
Neem alle toebehoren (zoals asschep, houtrek, spuitbus) uit de kachel.
Uitnemen houtrek: til het houtrek ca. 1cm op en beweeg het naar binnen toe. Draai hem
vervolgens uit de kachel weg, zie detail tekening 1.
Tekening 2.1:
Verwijder de vlamplaat uit de kachel door hem aan de rechterzijde iets op te tillen (min.
1cm). Schuif hem vervolgens naar rechts zodat de vlamplaat links vrijkomt van de
oplegbeugel. Door de vlamplaat nu iets te kantelen kan hij uit de brandkamer verwijderd
worden.
Verwijder aan de achterzijde van de kachel het ronde convectieschild.
Neem de bijgeleverde ringsleutel 17mm en schroef de moer M10 aan de binnenzijde van
de brandkamer (achterwand) los.
Leg de losgekomen moer en grendel in de brandkamer.
De 8mm dikke ronde plaat kunt u nu via de achterzijde van de kachel wegnemen.
Tekening 2.2:
Leg de 8mm dikke ronde plaat in de ronde uitsparing bovenop de kachel. De draadstang
M10 naar de binnenzijde van de kachel gericht.
Plaats de grendel zoals aangegeven in tekening 2.2 en 2.31 en draai de moer M10 op de
draadstang. De grendel moet evenwijdig met de achterwand van de kachel geplaatst
worden en met de “vlakke” kant naar u toe gericht.
Draai de moer M10 met de bijgeleverde ringsleutel vast.
Plaats de vlamplaat terug op de beugels.
Hang het houtrek terug. Zie detail tekening 1.
Het ronde convectieschild bewaart u. Deze moet weer geplaatst worden indien de kachel in
de toekomst als model met bovenuitvoer gebruikt gaat worden.
Tekening 2.3+2.31:
De kachel is nu klaar voor plaatsing als model met achteruitvoer.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JAcobus 9 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JAcobus 9 in the language / languages: Dutch as an attachment in your email.

The manual is 2,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info