652545

Jacob Jensen Rain Gauge Manual

19
Zoom out
Zoom in
Previous page
1/36
Next page
19
Congratulations on the purchase of your new JACOB
JENSEN
TM
Rain Gauge with remote collector. The rain gauge is designed
in Denmark by Jacob Jensen, whose products have gained
international recognition for their original, simple and classic
design. Jacob Jensen has received around 100 prizes from
around the world and has 19 products included in the Design
Study Collection and The Design Collection of The Museum of
Modern Art in New York.
The JACOB
JENSEN
TM
Rain Gauge is an easy-to-use, state-of-
the-art rain gauge. The package includes a main unit, the rain
gauge, and a remote unit, the collector.
The rain gauge can either stand on its own or it can be mounted
directly on the wall using a JACOB
JENSEN
TM
Mounting Plate.
The rain gauge can also be mounted on a JACOB
JENSEN
TM
Weather station Stand, on its own or with one or more products
from the JACOB
JENSEN
TM
Weather station Range.
The rain gauge is capable of monitoring the daily rainfall and
the total rainfall since last reset. It has a memory for a nine-day
rainfall history and for an alarm at a given rainfall. No wiring is
required between the rain gauge and the collector.
Before you begin
1. Install the batteries in the collector before installing batteries
in the rain gauge.
2. Place the collector as close as possible to the rain gauge
and then reset the collector (press the RESET button) after
installing/replacing the batteries. This will ensure easier
synchronisation between the transmission and reception of
signals. The synchronisation may take up to four minutes.
3. After synchronisation, position the remote collector and rain
gauge within the effective transmission range which, under
normal circumstances, is up to 20 - 30 metres.
Important: It is very important that the collector is placed on
an absolutely even and plane surface e.g. a wooden platform
on which you can mount the collector using the four screws in
the corners. The effective range is greatly affected by building
materials and the relative positions of the collector and rain
gauge. Try different set-ups for best results.
New purchases using the same frequency (433 MHz) may
interfer with the signal of the rain gauge and the collector.
Replace either the rain gauge or the new purchase.
Collector
Installing and replacing the batteries
The collector uses two “AA” size
batteries. (The batteries are included
and already installed).
Follow these steps to install or replace
the batteries:
1. Unscrew the two screws and remove
the top of the collector.
2. Open the battery cover.
3. Install the batteries as indicated by
the polarity symbols (+/-) marked
inside the battery compartment and
press the RESET button. At first time
set-up simply remove the plastic
strip between the batteries and the
polarity symbols.
4. Replace the battery cover.
5. Replace the top of the collector and tighten the two screws.
Rain gauge
Installing and replacing the batteries
The rain gauge uses two “AAA” size batteries. (The batteries
are included and already installed).
Follow these steps to install or replace the batteries:
1. Open the battery cover on the back of the rain gauge.
2. Install the batteries as indicated by the polarity symbols (+/-)
marked inside the battery compartment. At first time set-up
simply remove the plastic strip between the batteries and the
polarity symbols.
3. Replace the battery cover.
UK
JACOB
JENSEN
TM
Rain Gauge (registered design)
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jacob Jensen Rain Gauge at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jacob Jensen Rain Gauge in the language / languages: English, German, Dutch, Danish, French, Swedish, Spanish, Norwegian as an attachment in your email.

The manual is 0,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info