652549
13
Zoom out
Zoom in
Previous page
1/28
Next page
13
If the doorbell does not work
1. Check that the volume is not turned OFF in the battery compartment of the chime.
2. Check that the batteries are correctly installed.
3. Check the batteries by activating the bell push. The lights on both the chime and
the bell push should light up (ensure the light is not turned OFF on the chime).
Replace the batteries on the unit not lighting up.
4. Reset by pressing the RESET key in the battery compartments of the chime and the
bell push.
5. Check that the units have identical codes. If not, adjust the codes to match exactly
(see paragraph "set the code").
6. Check that the chime and the bell push are not too far apart. Move the chime
closer to the bell push.
7. Other products or materials may interfere with the signal. E.g. cordless alarm
systems or other cordless products using the frequency 433 MHz, building
materials e.g. steel, concrete or fluorescent tubes etc. Remove the object causing
the interference or find another position for the chime, where a clear signal can
be obtained.
Environmental concerns and disposal
Electric and electronic appliances and enclosed batteries contain materials,
components and substances that can be damaging to people’s health and to the
environment, if the waste is not disposed of correctly.
Electric and electronic appliances and batteries are marked with a crossed-out
wheelie bin symbol as illustrated below. It indicates that electric and electronic
appliances and batteries are banned from being disposed of as general household
waste, and have to be collected separately.
Please ask you dealer about current means of disposal.
- The contents of this manual are subject to change without notice.
- The manufacturer and its suppliers accept no liability whatsoever for any damage,
expenses, loss of profits or any other damage incurred as a result of using this
product.
13


Need help? Post your question in this forum.

Forumrules
1

Forum

jacob-jensen-doorbell-cordless

Reset search

  • After replacing batteries in the push bell and resetting both the push bell and chime, only the classic town hall bell tune rings on all of the 1 to 5 melody options
    Any ideas if this can be rectified. We prefer the Jacob's door knock option
    Regards Peter Lurie Submitted on 12-5-2023 at 09:55

    Reply Report abuse
  • Ref. Jacob Jensen cordless doorbell
    Having changed the batteries in the doorbell and receiver and before screwing on the backplanes I pressed the bell testing to see if it rings again. I was pleased that it was the case.
    After screwing the backplate back to the bell it wont chime. What am I doing wrong?
    Karin M. Submitted on 2-9-2020 at 15:04

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jacob Jensen Doorbell Cordless at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jacob Jensen Doorbell Cordless in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Norwegian as an attachment in your email.

The manual is 0,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info