680367

Jabra GN9350e Manual

6
Zoom out
Zoom in
Previous page
1/46
Next page
Power mode Range* DECT Range* US DECT
Normal Up to 120 m Up to 400 ft
Low Up to 60 m Up to 200 ft
Very Low (V. low) Up to 25 m Up to 80 ft
* In typical office environment
Note: The Normal power mode is the default setting.
To change the range/power mode:
1. Use
34
to locate the range/power mode menu on base display.
2. Use
5
6
to select one of the 3 modes from the menu.
3. Press OK to confirm the new mode.
2.4.4 Sound mode selection
This menu is split into two sections: “Treble/Normal/Bass” and “Fixed/Switch”. These two
sections are separated by a blank line. It is possible to choose one mode in each of the two
sections.
Your headset offers 3 treble/bass modes (Treble, Normal and Bass). You can change these to
suit your personal preferences or needs, and seperately determine the USB sound quality.
Sound mode Effect Benefits
Treble Accentuates high tones Ideal for users with slight high-
frequency hearing loss
Normal Accentuates all tones evenly Ideal for all users
Bass Accentuates lower tones Ideal for users preferring a bass-
rich sound
Sound mode Effect Benefits
Fixed Speech quality in headset loudspeaker as
known from traditional telephones (nar-
rowband)
Improved talk time in USB mode
Switch Automatically switches between wideband or
narrowband sound quality. In conference call
mode, automatic switching is disabled.
Enhanced USB sound quality
Note: The Normal mode is the default setting.
Important: For USB applications, the volume settings are fixed and need no adjustment.
2.4.2 Hookswitch selection
The GN9350e enables you to answer and end calls remotely by using the GN1000 RHL, or its
built-in electronic hookswitch (EHS) modes. EHS is only possible on certain telephone sys-
tems. In order to determine which telephones have the EHS feature enabled, please refer to our
website www.jabra.com. Please also refer to your telephone´s user manual for clarification.
4 modes are available
GN RHL non-EHS; works with the GN1000 RHL
DHSG e.g. Siemens and Elmeg desk telephones
AEI e.g. with Tenovis desk telephones
MSH e.g. with Alcatel desk telephones
Note: By default, the GN9350e is set to the RHL interface, which also is the correct setting if you
manually operate your handset when answering/ending calls as described in the Guide for basic set-up
and use.
To select the appropriate interface:
1. Use
34
to locate the hookswitch selection menu
on base display.
2. Use
5
6
to select one of the 4 interfaces from the menu.
3. Press OK to confirm the interface.
Note: To use the DHSG, AEI or MSH function, connect the connec-
tion cord (accessory) to your desk telephone and the AUX port of
the GN9350e.
2.4.3 Range/power selection
Your headset offers 3 range/power modes (Normal, Low and Very Low). The Normal mode
is ideal for most users. However, if you experience interference from other communication
devices during your calls, you may want to switch to the Low or Very Low modes. Changing to
Low or Very Low power modes will reduce the range of your headset.
6
7
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jabra GN9350e at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jabra GN9350e in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 6,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info