680368
12
Zoom out
Zoom in
Previous page
1/46
Next page
8. Troubleshooting
GN9350e GN9330e
GN9330e USB
Q: How to make a reset
A:
1. Place the headset in the basestation. Then unplug the power supply cable from the base
station.
2. Remove the headset from the base station.
3. Remove the battery pack by sliding the backside of the headset speaker-housing
downwards
4. Slide the battery pack onto the headset again the LED on the headset will turn sold
blue for 2 seconds. Then place the headset in the base station and hereafter connect the
power supply cable again.
5. The four LED’s on the base station will then flash green once. The LED on the headset will
flash blue once after 5 seconds.
1. 2. 3.
4.
GN9350e
GN9330e
GN9330e USB
Q: Nothing happens when I try to adjust the clear dialtone.
A: Make sure the base is set for telephone mode and the link is established (telephone but-
ton’s indicator on base is flashing). Also ensure that the telephone is activated (handset is off
the hook or line button is pressed).
Q: I am getting a buzzing sound on my headset.
A: If the unit has been correctly set-up, your telephone may not be fully immune to the radio
signals the headset uses. To overcome this problem, move the headset base at least 30 cm away
from the telephone. On GN9350e, you may want to reduce the range of your unit instead.
GN9350e
GN9330e
GN9330e USB
Q: My customers say they cannot hear me.
A: Ensure the base unit is in the correct system setting by adjusting the clear dial tone switch.
You should experience a high quality dial tone from the headset. Then call a friend and adjust
your headset’s microphone as described in the Guide for basic set-up and use. For setting
information on your telephone system, please also refer to www.jabra.com.
GN9350e
GN9330e
GN9330e USB
7.2 Headset’s visual indicators
Visual indication Headset action
Link indicator (blue) Flashing when linked up
Lit for 2 seconds Successful pairing, including adding headsets in conference
mode
Lit (during adjustment) Receive volume reorientation (+/-) is being adjusted
Flashing rapidly Headset in DECT/GAP mode
GN9350e
GN9330e
GN9330e USB
7.3 Bases visual indicators
Base action Visual indication
Telephone mode button’s indicator/
Base talk button
Lit when in telephone mode and flashing when linked up
USB mode button’s indicator/
Base talk button
Lit when in USB mode and flashing when linked up
Mute functionality indicator (red) Lit when mute is activated
Battery indicator (4 green diodes) 1 indicator light = 25% of a full charge
4 indicator lights = 100% full charge
Rightmost lit diode flashes when charging, leftmost diodes
are lit
Leftmost diode flashes when <30 minutes of talk time
remaining
When headset placed in cradle for charging, all diodes light
for 1 second
Battery indicator (chargecradle for
additional battery, GN accessory)
Lit when charging, green diode
18
19
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jabra GN9330e at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jabra GN9330e in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 6,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info