227976

Jabra bt 250v Manual

5
Zoom out
Zoom in
Previous page
1/27
Next page
IMPORTANT: Do not hold the button down for more than 3 to 5 seconds when
turning the headset on or else it may go into pairing mode, and the blue indicator light
will turn solid. If that happens, turn off the headset, wait 3 to 5 seconds, and repeat
process for turning the headset on.
Status indicators
What you hear
Quick series of 2 tones
– low to high pitch (when
active mode starts)
Quick series of
2 tones
– high to low pitch (when
standby mode starts)
3 beeps every 30 seconds
3 beeps every 5 minutes
Status
Active Mode⁵
•
Call in progress
•
Up to 7 hours of talk-time*
Standby Mode
⁶
•
Waiting for call
•
Up to 200 hours of
standby time*
Low Battery (in active mode)
•
3 – 5 minutes of talk time left
Low Battery (in standby mode)
•
3 – 5 minutes of talk time left
What you see
Flashes every
second
Flashes every
3 seconds
3 flashes every
second
3 flashes every
3 seconds
* Depending on phone type and usage.
Jabra BT250v is ready to wear on the right ear. If
you prefer the left, gently rotate the MiniGel 180°.
For optimal performance, wear Jabra BT250v and
your Bluetooth phone on the same side of your
body. In general, you will get better performance
when there are no obstructions (including parts of
your body) between the headset and the phone.
Choosing wearing preference
7
Fig. 4
Ending a call
9
Making a call
8
If Jabra BT250v is off, turn it on now (see Turning headset on/off section).
Using phone’s keypad
1. Dial number on keypad.
2. Press phone’s “send” key.
Using voice-activated dialing (after you’ve set up voice tags on your phone)
1. Press and release once. You’ll hear
1 short beep while doing this.
2. You’ll then hear the voice-activation tone; say the name of the person you wish to call.
NOTE: Record voice tag from headset for better reception.
•
Press and release once
OR
•
End call from phone’s keypad
Call-waiting*
11
Answering a call
10
•
After you hear the ring tone, press and release once
OR
•
Answer the call with your phone’s keypad. You may then need to transfer the call to
the headset by pressing and releasing once (depending on your phone)
•
(Recommended) Use standard method from your phone’s keypad which typically
involves pressing the “send” button
OR
•
Press and release once to answer the incoming call and toggle between calls
(some phones do not support this headset feature)
6 7
English
English
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jabra bt 250v at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jabra bt 250v in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 1,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info