Auto-Answer
™
and Auto-Transfer
™
functions will only work when attempted with the
last device the headset was connected to.
Please use the following easy to follow guide –
a) Configuration Mode
Before you can pair your headset you need to put it into configuration mode.
Configuration mode is used to perform two functions – ‘pairing’ and Audio mode
selection. Configuration mode is entered simply by pressing and holding down the
Multi-Function Button (MFB) with the headset boom closed until the Blue indicator
light turns on, then release the MFB.The LED will remain on.The headset is now in
configuration mode and stays in this mode for 3 seconds awaiting further user
action.The headset will then return to the “off”state if no further action is taken.
b) Pairing Headset to the Phone
1. With the headset boom closed and the headset close to the phone (within 30
feet), enter configuration mode as described above. During pairing it is
recommended that the headset and phone (or device) are not more than 1metre
(3 feet) apart – with no solid objects in between.
A fully charged battery provides over 4 hours of talk time, over 10 hours of linked standby
time (Bluetooth data link – no audio), 72 hours of unlinked standby time (no Bluetooth
link, boom open) and over 40 days of storage time (boom closed).
Low Battery Warning Tones: When you hear five rapid high tones through the headset’s
speaker at 20-second intervals, the headset needs recharging, and you will then need to
follow the above steps 1-4.
Linking the Headset to the Phone (Pairing)
The Bluetooth connection between the headset and your phone can be established via a
paired link.With a paired link, the phone remembers the headset's ID, eliminating the
need to repeat the set up process with future use.The headset can be paired with up to
eight Bluetooth devices. Devices are stored in a “Paired Device” list in memory by
chronological order.When an attempt to pair to more than eight devices is made,the
oldest paired device is removed from the list.
Any of the eight paired devices can initiate a paired connection to the headset.
The headset will only initiate a paired connection (via opening the boom) with the last
device it was connected to.When a new device is paired to the headset it, by default,
becomes the “last connected”device. Should any other of the eight devices initiate a
connection to the headset afterwards,that device then becomes the “last connected”device.
8 9
