555058
9
Zoom out
Zoom in
Previous page
1/16
Next page
JA-80Y user manual MFJ55800
9
Acoustic signalling can be used on both GSM and landline networks.
The GSM dialler can report all event information from the alarm system via SMS or
acoustically. You can change the setting of event reporting for any phone number –
(see 11).
M Sequence What will be sent to phone no(s):
1. 81 1 ____ *0
2. 81 2 ____ *0
Alarm SMS reporting any type of alarm which occurred in the
system (intrusion, fire, tamper, panic).
Technical SMS reporting system faults.
3. 81 3 ____ *0
4. 81 4 ____ *0
Alarm SMS plus phone call for any alarm in the system. If
you answer the call you hear a siren sound.
Technical SMS reporting system faults.
5. 81 5 ____ *0
6. 81 6 ____ *0
Alarm SMS plus phone call for any alarm in the system.
Information SMS whenever the system is being set/unset.
Technical SMS reporting system faults.
7. 81 7 ____ *0
Phone call for any alarm in the system. If you answer the call
you hear a siren sound. This setting is suitable for landline
network calls.
8.
Technical SMS reporting system faults. This memory is
reserved for an installer.
Table 1 Factory-default reports assigned to the numbers 1 to 8
12. Authorizing a phone number for dialling in
You can authorize a phone number for dialling-in by storing * at the end of the number
and following it by a single digit (1, 2, 3, 8 or 9 – see below). If this number calls, the
communicator generates * after the first ring (as if it had been entered manually on the
system keypad).
This allows you to use dialling-in for the following:
1 setting the whole system (equivalent to the ABC keypad button)
2 setting A (= A button)
3 setting A and B for partial setting, or B for a split system (= B button)
8 PGX turns on for 2s (if PGX is programmed for the 2s pulse function)
9 PGY turns on for 2s (if PGY is programmed for the 2s pulse function)
13. GSM signal strength measurement sequence 922
Good quality GSM signals are necessary for the reliable functioning of the communicator.
Entering 922 starts GSM signal measurement. The keypad then displays the signal
strength in the range 0/4 to 4/4 and measurement is repeated every second (indicated by
beeps). The signal should read at least 2/4. In places with a weak signal we recommend
consulting your installer. Press the # key to exit GSM signal measurement.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jablotron JA-80Y at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jablotron JA-80Y in the language / languages: English as an attachment in your email.

The manual is 0,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Jablotron JA-80Y

Jablotron JA-80Y Installation Guide - English - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info