631261

Jablotron JA-80Y - GSM communicator Manual

8
Zoom out
Zoom in
Previous page
1/16
Next page
JA-80Y user manual MFJ55800
8
Programming in maintenance mode
Programming in maintenance mode requires access to be enabled by a service
technician. Otherwise, no programming is possible – any instruction sequence will be
rejected by the system and the keypad will beep four times.
The following description is intended for a system administrator, who knows the control
panel master code. All the settings can be performed via keying-in on a system keypad. An
unfinished sequence can be cancelled by pressing the # key. A sequence is only stored in
control panel memory (or executed) after the sequence has been completely entered. All
the settings are only applicable if the control panel is in maintenance mode. To put the
control panel into maintenance mode, make sure the system is completely unset. Then
enter the following sequence on the system keypad:
∗
0 master code (card) The keypad will display Maintenance mode.
11. Reporting to phones sequence 81 M xxx..x ∗0
The communicator is factory pre-programmed so that you only have to enter destination phone
numbers to establish standard SMS transmissions or acoustic signalling.
The following sequence allows you to store phone numbers in seven memories. The most
frequently desired reports are already assigned to the telephone number memories by
factory-default. By entering a telephone number into a particular memory you select what
will be reported to this number. Use the following programming sequence:
81 M xxx..x ∗0
where: M is memory 1 to 7
xxx...x is a phone number (max. 20 digits), enter *9 before the number,
if you need the ‘+’ prefix for international calls. To use an
attached SMS phone, enter code 001 instead of the telephone
number.
To erase a number from memory M enter:
81 M ∗0
where: M is memory 1 to 7
Example: Entering
81 3 603 123 456 ∗0 will store the number 603123456 in memory 3.
Entering 81 3 ∗0 will delete memory 3.
Notes:
• For SMS transfers, only use numbers of mobile phones or call centres that can
transfer SMS messages.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jablotron JA-80Y - GSM communicator at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jablotron JA-80Y - GSM communicator in the language / languages: English as an attachment in your email.

The manual is 0,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Jablotron JA-80Y - GSM communicator

Jablotron JA-80Y - GSM communicator Installation Guide - English - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info