554850
2
Zoom out
Zoom in
Previous page
1/2
Next page
The JA-80T - USB computer interface MHY51300
2
The JA-80T - USB computer interface
Jablotron JA-8X and JA-6X series control
panels can be connected to a computer via the
JA-80T interface cable. Connect the digital line
bus connector to the RJ-4 connector in the
control panel. Then connect the USB
connector to any free USB port on the
computer. The provided drivers must be
installed in to the computer to use the JA-80T.
Once installed you can start using ComLink
software – using this software the user/installer
can easily program, operate, test the system,
read the 127 latest events and much more.
Specification
Connectors (PC, control panel):USB and RJ-4
External power supply: Not required
Length of the USB cable: 2 m
Length of cable connected to the control panel:
1 m
(cables can be extended, see Note)
Compatibility: ComLink version 60 or higher
Supported operating systems: Win 98 SE,
Win2000, Win XP professional or home edition
Complies with the essential
requirements of: 89/336/EC EMC
Directive - Protection concerning electromagnetic
compatibility when is used for its intended
purpose.
Jablotron Ltd. hereby declares that
the product complies with part 15 of the
FCC rules. Operation is subject to the
following two conditions: 1. This device may not
cause harmful interference, and 2. This device
must accept any interference received, including
interference that may cause undesired operation.
CAUTION: Changes or modifications no
expressly approved by Jablotron could void
the user’s authority to operate the
equipment.
Original of the conformity assessment can
be found at the web page
www.jablotron.com
, section Technical
support.
Drivers installation
Drivers and the ComLink software can be
found on the enclosed CD-ROM. The latest
version can also be found on website
www.jablotron.com
in the download section.
1. Insert the CD into your CD drive.
2. Connect the JA-80T cable to the control panel
and to the free USB socket on your PC.
3. Wait for the start up of the “New hardware
wizard”.
4. Search for the drivers on the removable
media (CD).
5. When installing for WIN XP, ignore the
notification about the wrong authenticity with
the WIN XP and continue in the installation
process.
6. Leave other parameters without any
modification.
7. Finish the new hardware installation wizard.
8. The JA-80T contains two devices in one,
therefore please wait for the “New hardware
wizard” to start again.
9. Repeat the procedure according to steps 4 to
7.
10. Your PC has two new devices after
successful installation - "Jablotron serial
interface" as a serial port (COM) driver and
the USB device with the same name as the
driver for the USB.
11. If you have not installed the ComLink software
yet, or if you have ComLink 59 or older, install
ComLink which is on the CD (the latest
version of ComLink can be found on
www.jablotron.com
, in the download section).
Note
Possible extension of the cables:
USB using a standard USB cable the length
can be extended to up to 5 meters.
RJ connector – the CT-04 cable can be used for
a cable length of up to 10 m. Using twisted cable
the maximum length can be up to 100 meters.
The two pins in the middle of the RJ connector
(data) should be connected to one pair on the
twisted cable. The other pair of the twisted cable
should be connected to the outer pins of the RJ
connector (power supply).
Although this product does not contain
any harmful materials we suggest you to
return the product to the dealer or
directly to the producer after usage.
Internet: www.jablotron.cz
Tel.: +420 483 559 911
fax: +420 483 559 993
Jablotron Ltd., Pod Skalkou 33
466 01 Jablonec nad Nisou
Czech Republic
The JA-80T - USB computer interface MHY51300
2
The JA-80T - USB computer interface
Jablotron JA-8X and JA-6X series control
panels can be connected to a computer via the
JA-80T interface cable. Connect the digital line
bus connector to the RJ-4 connector in the
control panel. Then connect the USB
connector to any free USB port on the
computer. The provided drivers must be
installed in to the computer to use the JA-80T.
Once installed you can start using ComLink
software – using this software the user/installer
can easily program, operate, test the system,
read the 127 latest events and much more.
Specification
Connectors (PC, control panel):USB and RJ-4
External power supply: Not required
Length of the USB cable: 2 m
Length of cable connected to the control panel:
1 m
(cables can be extended, see Note)
Compatibility: ComLink version 60 or higher
Supported operating systems: Win 98 SE,
Win2000, Win XP professional or home edition
Complies with the essential
requirements of: 89/336/EC EMC
Directive - Protection concerning electromagnetic
compatibility when is used for its intended
purpose.
Jablotron Ltd. hereby declares that
the product complies with part 15 of the
FCC rules. Operation is subject to the
following two conditions: 1. This device may not
cause harmful interference, and 2. This device
must accept any interference received, including
interference that may cause undesired operation.
CAUTION: Changes or modifications no
expressly approved by Jablotron could void
the user’s authority to operate the
equipment.
Original of the conformity assessment can
be found at the web page
www.jablotron.com
, section Technical
support.
Drivers installation
Drivers and the ComLink software can be
found on the enclosed CD-ROM. The latest
version can also be found on website
www.jablotron.com
in the download section.
1. Insert the CD into your CD drive.
2. Connect the JA-80T cable to the control panel
and to the free USB socket on your PC.
3. Wait for the start up of the “New hardware
wizard”.
4. Search for the drivers on the removable
media (CD).
5. When installing for WIN XP, ignore the
notification about the wrong authenticity with
the WIN XP and continue in the installation
process.
6. Leave other parameters without any
modification.
7. Finish the new hardware installation wizard.
8. The JA-80T contains two devices in one,
therefore please wait for the “New hardware
wizard” to start again.
9. Repeat the procedure according to steps 4 to
7.
10. Your PC has two new devices after
successful installation - "Jablotron serial
interface" as a serial port (COM) driver and
the USB device with the same name as the
driver for the USB.
11. If you have not installed the ComLink software
yet, or if you have ComLink 59 or older, install
ComLink which is on the CD (the latest
version of ComLink can be found on
www.jablotron.com
, in the download section).
Note
Possible extension of the cables:
USB using a standard USB cable the length
can be extended to up to 5 meters.
RJ connector – the CT-04 cable can be used for
a cable length of up to 10 m. Using twisted cable
the maximum length can be up to 100 meters.
The two pins in the middle of the RJ connector
(data) should be connected to one pair on the
twisted cable. The other pair of the twisted cable
should be connected to the outer pins of the RJ
connector (power supply).
Although this product does not contain
any harmful materials we suggest you to
return the product to the dealer or
directly to the producer after usage.
Internet: www.jablotron.cz
Tel.: +420 483 559 911
fax: +420 483 559 993
Jablotron Ltd., Pod Skalkou 33
466 01 Jablonec nad Nisou
Czech Republic
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jablotron JA-80T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jablotron JA-80T in the language / languages: English as an attachment in your email.

The manual is 0,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info